Aren’t apps better compareable to something like flatpack and this is the reason why they are updateable during runtime?

Regular Linux distros have 30+ years of history. It’s what most of us are used to. Immutable/atomic/transactional OSes are relatively recent hence the relatively low adoption rate.

Also, atomic OSes are, by nature, much harder to tinker with. After all, the goal is to provide the exact same image for all users. As a power user, it’s a bit frustrating. As a new user, having a virtually unborkable system is excellent.

If you plan on installing an atomic variant of Fedora, may I suggest uBlue Aurora instead of Fedora Kinoite? It is based on Silverblue/Kinoite but includes by default, among other QOL improvements, the restricted-licence codecs that must be manually installed in official Fedora products.

If the immutability in OS is well designed, then there shouldn’t be really an downsides or loss in comfort. That is, unless you’re a linux expert and like to tinker under the hood.

The general idea is, the core of the OS if read-only, and everything else that needs to be modified is mounted writeable. Ideally, protecting the core of the OS from writes, should for example prevent malware from installing a modified kernel or boot loader. Or maybe preventing the user from accidentally borking something so that their system becomes unbootable. How much of an advantage that is practice is dependent on use case. In the case of Steam OS on the steam deck, it’s perfect, since boot issues on the steam deck could potentially be tricky to fix as opposed to a standard PC.

Another advantage of immutable could theoretically be wear and tear of certain storage devices. e.g. Think of a raspberry PI and SDcards. If you could have most of the important stuff of the OS as read only on the SD card, and everything else on a usb disk or even an NFS mount, then the SD card should last much longer since no writes are happening on it.

As far as true security benefit is concerned… I can’t really say. It depends on how updates and eventual writes are actually handled to the immutable part of the OS. Obviously at some point, changes do happen. Like during a system update. In the case of Steam OS, The system portion is wiped and replaced the new version. Chimera OS, did something similar (I don’t know if they still use the same method). They had a read-only BTRFS partition, where they would then provide a new snapshot during an update, which would be downloaded and applied at the next reboot. This approach would hinder automated crypto malware for example (at least for system files).

Yes, pretty much always has too. /system is normally mounted read-only and all use data is in /data, so when you want to factory reset, you just format /data and reboot and voilà, brand new. Later versions also have a /vendor and a bunch of other partitions but the idea remains the same, as a user you only get to change /data (and /sdcard back before they had any meaningful internal storage, now it’s an overlay mount to /data/media/0).

Immutable distros were originally very focused on servers, and more recently distros for workstations has stated gaining more interest as the concept has matured.

With the advent of cloud computing “immutable infrastructure” started becoming more and more popular. This concept started out as someone sitting down and grabbing a normal Linux distribution, and installing all the necessary bits for the server purpose they needed. Then baking that into an image. Now you could launch new copies of that machine whenever you felt like it, and they would behave exactly the same. If any of them started doing something wonky, you just destroyed it and launched a new copy. This was very useful for software developers and operations people who could now more easily reason about how things behaved. And be sure that the difference in behaviour wasn’t because someone forgot to enable a setting, install a tool, or skipped a step in the setup.

On the software development side, you also simultaneously saw more and more developers make use of functional programming methods, and al’ng with those immutable data structures. Fundamentally, instead of adding an item to a list, you make a new list with all the old and the new items in it. You never change the data after it’s creation. Each “change” is a new copy, with the difference already built in.

Then containers started becoming popular. Which allowed software developers to build a container image on their local computer, and then ship that image to a server, where the image behaved exactly as it did on their local machine. This also meant that the actual OS became less and less important, as everything needed by the container was already bundled in the container. The containers also worked as “immutable”, since everything you would install or change within the containers would be immediately lost when the container was destroyed, and recreating it would be exactly as when the image was built.

The advent of containerised workloads, gave rise to a lot of different Linux distributions. Since the containers pretty much only needed the Linux kernel from the OS, it was pretty easy to make a container-centric operating system. And in turn lock down everything else, even completely omitting having a package manager. Stuff like CoreOS, Flatcar, Rancher OS, and many others were immutable linuxes that only catered to containers. I don’t know the exact mechanism for all of these, but at least the original CoreOS and Flatcar make the actual system read only, and on top of that had two man partitions, one of the partitions would be the current system, and the other would be where updates were downloaded. Once an update was downloaded and ready, you just rebooted the machine, and it would be running off the updated partition. Which also meant easy rollback if you got a broken update. You could just boot off the other unupdated partition.

Containers were however rather ill suited for desktop applications, as there were no good way to provide a GUI. You could serve up a Web page, but native GUI apps were tricky.

That’s where Flatpak, Snaps and all that came, which essentially brings the container mentality to normal desktop apps. This brought immutability to individual apps, as they brought their own dependencies. And therefore didn’t have to rely on the correct versions of dependencies being available on the machine.

The logical next step was of course to add immutability to workstation distributions. This is where the popularity of Fedora Silverblue, NixOS, and many others really started taking shape.

I believe Fedora Silverblue uses ostree to make the system “immutable”. Of course you can still make changes to your system, but the system is built to be completely aware of the state before and the state after, this is what’s called “atomic”. There’s no such thing as a partially installed package. There is only the state before installing something, and the state when the thing is fully installed. You can roll back to any of the previous states, to recover from a broken update or misconfiguration. This also makes trying out new things with no risk. Trying out a new desktop environment, and it broke your system? Just roll back. Accidentally uninstalled a critical package? Just roll back. What to try out a new display manager? Just apply the config and roll back if you don’t like it.

SteamOS also does the thing with multiple partitions, and even allows you to turn off the immutability. Other distributions aren’t as lenient. There’s no way to turn off the immutability in NixOS or Fedora Silverblue.

I find it hard to imagine a system that is not borkable by a superuser. Maybe it’s helpful to think of immutable setups as harder to bork by accident during routine maintenance (e.g. through faulty updates) and more resilient to bad code (through containerization).

Depending on the use case there’s usually a temporary system that’s there only to take the update from the user partition and apply it to the system partition. So even if you bork the update it’ll still boot into that environment and install the system again. Valve does provide bootable images to put on a USB stick if you do break it pretty bad. It’s just a PC, it doesn’t do much to stop you from wiping the disk. The route Android took is A/B devices, when you’re using A you update B and then reboot into B, then the next update you’ll be updating the A partition and reboot into it. Plus if the next one fails to boot for some reason you can revert to the old version as if nothing happened, and retry the update from scratch. Except Samsung, because I don’t know I guess they want to turn the updating into a whole experience of anticipation or whatever crap reason they have for it.

They are written but don’t replace something in the read-only OS. They are just overlayed, so once removed the original is still there. How they do it differs. There are actual overlay filesystems for the job, or some use btrfs where all subvolumes behave mostly like virtual partitions (and copies of a subvolume only take space for changes of the original).

We need you to fix the thinnet again.

TempleOS?

It’s complicated. Technically no, but God can roll out a new image with the updates, so in practice, yes?

Why is religion never simple…

mOSes

And Miles Davis

Mutations are also bad, see the absolute fuckwaffle that used to be Windows NT (or Godzilla or something).