I was setting up my laptop for traveling and adding Wireguard VPN configuration.
The Wireguard config generated by router only contains IPv4 address (10.0.5.x), and while testing the VPN to my surprise “what is my ip” websites can find my IPv6 address (I USB tethered mobile connection to my laptop).
It looks like NetworkManager does nothing about IPv6 connection if VPN doesn’t have IPv6 settings, which is bad for road warrior type of VPN configuration.
Is there an easy toggle to turn of IPv6 if VPN is connected and otherwise? Or is only option to disable all IPv6 no matter what?
Removed by mod
Or you could just… learn to use the modern internet that 60% of internet traffic uses? Not everyone has a dedicated IPv4 anymore, we are in the days of mobile networks and CGNAT. IPv4 exhaustion is here today.
Removed by mod
Huh weird that it would be removed, that’s a fair comment.
For Web scraping and other activities by so-called “legitimate” companies to varying degrees, this may be the case. But for general bots, they are generally attempting to scan and probe the entire IPv4 range, since it can be exhaustively checked in a reasonable amount of time and the majority of IPs have hosts on them. Enumerating the entire IPv6 space is quite literally impossible without some external list of hosts known to exist, due to the number of hosts. This happens, but it’s a much higher hanging fruit for an attacker so far fewer will bother. So you generally see few to no continuous probes on things like sshd over IPv6 unless you have a domain name. I’m guessing a lot of bots (in botnets) are dumb old technology that doesn’t even have IPv6.
NAT was always a hacky workaround. And although it effectively ends up functioning as a firewall under normal usage when combined with a typical “drop invalid incoming packets” rule, it was not designed to be a firewall and shouldn’t be assumed to always function as one. A simple accept established, default drop firewall rule should do the trick and should be used on both v4 and v6 regardless of NAT (and probably is on your router already).
If your goal is privacy in the sense of blending in, you can still use NATv6 and this is a good use case for it. This is what VPNs like Mullvad use. If your goal is privacy in the sense of being more difficult to track across sessions, you can enable IPv6 privacy extensions which essentially generates a new IPv6 address for every connection your device makes. So in this sense it’s more private than IPv4
Where are you getting 60%? Google’s IPv6 Adoption page has it under 50% still:
(while other stats pages from big CDNs show even less)
Huh, I misremembered then. I stand corrected.
Notable though that there are specific countries (such as India) where adoption is far higher at 72%
Removed by mod
Removed by mod
Removed by mod
In my case just disable IPv6 in WiFi is enough.
sysctl looks like the most universal way.
net.ipv6.conf.all.disable_ipv6 = 1net.ipv6.conf.default.disable_ipv6 = 1I keep hoping someone will come up with a half-measure that looks like ipv4 with an extra octet and writable in hex.
We can either take yeeeears to do it well, or we can take more decades to try and big-bang it. This ain’t 1983.
that was proposed as “IPv4.1” on April 1, 2011: https://web.archive.org/web/20110404094446/http://packetlife.net/blog/2011/apr/1/alternative-ipv6-works/
Removed by mod