I’ll start. Did you know you can run a headless version of JD2 on a raspberry pi? It’s not the greatest thing in the world, but sometimes its nice to throw a bunch of links in there and go to sleep.

  • _thebrain_@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    If you prefer usenet, work your way into a few good private trackers. If you prefer torrents, get an invite to a couple of indexers. Backup methods are key to success.

      • pcjones@feddit.de
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        1 year ago

        Short answer: no

        Long answer: yes, but they are basically useless. Except for some indexers that cost money but also have a free plan where you are capped at like 5 downloads per day.

  • Madbrad200@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    stop manually browsing torrent sites! You’re wasting your time.

    Download qBittorrent. Download Jackett. Configure Jackett to work inside qBittorrent. You now have a way to search hundreds of trackers all at once within seconds and find literally anything you want.

      • huojtkeg@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Prowlarr has a prettier UI but the torrent sites they support are maintained by Jackett. It noone gives credit, at some point Jackett won’t be maintained and Prowlar neither.

        Disclaimer: I’m qBittorrent, Jackett, Flaresolverr and Bazarr developer.

      • Lemmy Reddit That@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        I have all of these programs running on raspberry pi, including Flood (mobile friendly UI for qBittorrent, also supports Deluge), and plex media server. It can’t be easier to watch movies and tv shows that way.

          • Lemmy Reddit That@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            Everything is running on Pi. But I have Raspberry Pi 4 with 4GB of ram. Actually I have Raspberry Pi 400, which is basically 4GB variant of Raspberry Pi 4, with slightly overclocked CPU and passive cooling, inside small keyboard, but I only got that because Raspberry Pi 4 was out of stock.

  • pcjones@feddit.de
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    If you are looking for German (or German + English dual language) content it can be very hard to find stuff on public torrent trackers and it’s pretty hard to get onto private German trackers - but don’t worry, there is a solution:

    Usenet and the indexer sceneNZBs.com that specialises in German releases have got you covered!

    If you want to automate the search for German Dual Language content using Radarr/Sonarr I made a guide (that also works for torrents too): https://github.com/PCJones/radarr-sonarr-german-dual-language

    • KiofKi@feddit.de
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      As a German, I can confirm: Usenet is the way to go. For me it’s fileleechers (invite only afaik) for German content, and nzbgeek for the rest. All combined with Sabnzbd and Plex. Will have a look at your guide tho!

      • pcjones@feddit.de
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        1 year ago

        fileleechers is a board and not an indexer though right? So you can’t add it to Sonarr and Radarr

        Feel free to correct me, I don’t know a lot about them since they are invite only

        • KiofKi@feddit.de
          link
          fedilink
          English
          arrow-up
          0
          ·
          1 year ago

          Oh yeah that’s true, just a board. But it’s ok for the occasional German content I need. No premium membership needed at least.

  • Janis@feddit.de
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    piracy is a latter.

    at the bottom there is the person getting a pirated ware physically from someone who copied it.

    then steps later there is rapidshare or whatever filehosters still exist.

    more steps up are public torrents and trackers.

    then there is forums that use a variety of sharing technologies like (private) torrent or hosters.

    nzb is next.

    then there is irc - which at best is linked to some of the outer ring ftp servers.

    ftp servers run by currygroups is next. and they leech from

    the core of scene ftp servers.

    sure i missed exotic outlets of the piracy latter like ondemandpiracystreaming, ssd-by-snailmail and so on… we all agree vpn is key. i think irc always has worked better than torrent ever and being easier to access thab nzbs.

      • Janis@feddit.de
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        well for starters you could just go xdcc.eu,search some shit, fire up hexchat, obey channel rules (e.g you have to register your username) and xdcc request the file. next up you might want to do you own irc bot maybe selfhosted on a Pi or as a service and teach that bot what to get you on a regular basis like tv shows. then never use xdcc.eu ever again and run your searches through said bot. maybe get lost in the whole topic and have a telegram bot run on the irc bot Pi to update you on latest downloads and so on… you can have an irc client on your phone and then tell your bot what to request and download.

  • navigatron@beehaw.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Wireguard creates a new network interface that accepts, encrypts, wraps, and ships packets out your typical network interface.

    If you were to create a kernel network namespace and move the wireguard interface into that new namespace, the connection to your existing nic is not broken.

    You can then use some custom systemd units to start your *rr software of choice in said namespace, rendering you immune to dns leaks, and any other such vpn failures.

    If you throw bridge interfaces into the mix, you can create gateways to tor / i2p / ipfs / Yggdrasil / etc as desired. You’ll need a bridge anyway to get your requester software interface exposed to your reverse proxy.

    Wireguard also allows multiple peers, so you could multi-nic a portable personal device, and access all your admin interfaces while traveling, with the same vpn-failure-free peace of mind.

  • crossover@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    1 year ago

    I’ve personally found it better to pay for a seedbox and connect to it via encrypted FTP than to worry about VPNs and downloading torrents locally. I share the cost between a couple of friends and we all access the seedbox and download/stream what we need from it. I don’t have to worry about keeping my computer running either.

  • Aetherion@feddit.de
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    1 year ago

    I really want to thank you for this post, it opens up some long hidden secrets and gems inside the piracy world <3

    I want to add something to this thread for my advanced pirates: irc xdcc chats for directly downloading content use http://sunxdcc.com to search for the content you are lookin for! (though, it’s very manual)

  • CaptainBlagbird@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Synology NAS (with SynoCommunity) + Transmission + Sonarr/Radarr/Prowlarr/etc + Kodi

    It’s amazing, the new episodes or movies just show up right there in the media center, with correct metadata, ready to be watched.

    • Samsy@lemmy.ml
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      I never tried out all these “arr” services because I thought they only deliver english language. Is it possible to use other languages?

      • pcjones@feddit.de
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        They can work with other languages, but it can take a while to find a correct setup

    • JC1@lemmy.ca
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      The modularity of docker makes this great! I have a docker stack with overseerr, 2x sonarr, 3x radarr, 2x readarr, lidarr, unpackerr and sabnzbd. Another stack with nordvpn and qbittorrent. It’s so easy to setup and it becomes very powerful.

      I have some users on Plex that simply do some requests on overseerr, I approve them, then everything gets downloaded automatically. They just have to wait for it to be available. I used to be suscribed to Netflix, not anymore since their offering dropped while their prices raised.

        • pcjones@feddit.de
          link
          fedilink
          English
          arrow-up
          0
          ·
          edit-2
          1 year ago

          Radarr/Sonarr can’t handle multiple versions of the same movie/episode, so a lot of people have a second instance for 4K movies (so they can have both a 1080p and a 4K version of the same movie). Also if you have a lot of anime it can be worth it to have a Sonarr instance configured just for that

  • eroc1990@lemmy.parastor.net
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Docker, if you can run it on your hardware (either your normal system or on dedicated hardware) is a Swiss army knife that can help level up your acquisitions, and provides you with an isolated application environment if you don’t want to install the applications directly to your device. For media specifically, there is a suite of applications under the same *arr naming scheme that allows you to index, monitor for releases of, and acquire different television shows, movies, music, and books.

    Some container maintainers build in different capabilities into their torrent client containers, such as Binhex’s qBittorrent and Deluge applications, that have VPN connectivity built in, so any network traffic running through that container will automatically use your VPN provider’s WireGuard or OpenVPN capabilities, depending on who you use. Once you have that running and your tags tuned in the *arr apps, you have a headless, mostly independent machine constantly working on acquiring and upgrading your media.

    Sidenote: the *arr apps can be controlled by mobile apps like LunaSea on iOS, and nzb360 on Android. The latter can also integrate with your torrent clients.

  • BeezKnuts@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    What I really want to know is what you guys use for getting torrents for entire seasons of shows, or even the entire show at once. I’m not new to piracy, I’m just new to talking about it with people.

  • max2078@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    1 year ago

    Using file hosters instead of Usenet, that’s a Paddlin’. Using JD2 instead of PyLoad, that’s a Paddlin’. Using a headless version of JD2, that’s a Paddlin’. Using an overpriced RPI, that’s a Paddlin’.