Figure announced during its deployment in January that the robots would undergo training for twelve to twenty-four months. After this training period, they will be integrated into the facility with the precise skills required for each task.

That’s a pretty long training period. I wonder if any of the training data is reusable if the assembly process changes slightly?

Figure aims to create a global model that can manage billion-unit humanoid robots. The company points out that there are about 10 million unsafe or undesirable jobs in the US alone.

Not sure how I feel about 10M workers being dismissed over time… the robot itself is really impressive regardless

This looks like one of those low cost netbooks from the time where “EPad” and “MID” tablets were a thing. There is an edition of Windows CE floating around for these - but WiFi will not work, neither the modem if this has one built in.

No idea about Linux - there is a kernel so you’re technically half way there, but considering most of these had a slow single core ARM CPU and 256MB of RAM on a good day, practical use is limited IMO

ASMedia is the only controller IC manufacturer that can be trusted for these IME. They also have the best Linux support compared to the other options and support pass-through commands. These are commonly found in USB DAS enclosures, and a very small fraction of single disk SATA enclosures

Innostor controllers max out at SATA 2 and lock up when you issue pass-through commands (e.g. to read SMART data). These also return an incorrect serial number. These are commonly found in ultra cheap desktop hard drive docks, and 40pin IDE/44pin IDE/SATA to USB converters

JMicron controllers (not affiliated with the reputable Micron) should be avoided unless you know what you are doing… UASP is flaky, and there are hacky kernel boot time parameters required to get these working on Raspberry Pi boards. Unfortunately these are the most popular ones on the market due to very low cost

Probably not.

However, not all USB to SATA adapters support SMART, so even if there is a bad sector that gets remapped by the HDD on-the-fly (and thus does not show up in the software scan), you may not find out easily

Yepp MK8D, with update 3.0.1 and the booster course pass DLC.

IIRC as long as the host player has the DLC, all other players can play on the DLC maps in the online session

I have MK8 running in an emulator on my Deck with almost all DLCs. Online used to work using local LAN multiplayer (the emulator would redirect the LAN lobby to a server on the web). For multiplayer to work, all players must have the exact same version of MK8 running in their emulator.

Since the emulator’s development was shut down by a certain company, online multiplayer functionality needs some config changes to carry on working, and the lobbies are nowhere near as full as they used to be…

Edit: IIRC, there is a button you must hold while on the MK8 menu to enter local LAN mode

This infographic is really helpful. Stuff like this makes me relieved I use the majority of services in a browser, rather than native apps

Chromium… I’m so getting downvoted with this one.

Why? Anyone is free to use whatever browser floats their boat 🤷‍♂️

Firefox itself is quite sluggish and slow to open on that piece of hardware

Do you get the same issues on an older version of Firefox for that device? If yes, proceed with caution - your device’s internal EMMC might be nearing EOL considering how old Android 6 is

But the problem is they all do not support modern arm64 apps that most Android phones use nowadays. Instead they need this other type called armeabi-v7a

They probably just stopped building for Android 6 devices. The SDK and various third party libraries continue to add new features all the time, and unlike Firefox, the majority of devs do not have the time or resources to manually code-in the missing bits to retain compatibility with old versions of Android. As a side effect, these custom implementations may have bugs or issues that go unnoticed due to the shrinking install base.

One of the more noticeable bits that changed is the Share API, which is why Firefox’s one looks so different vs every other app. There are other things like enhanced battery optimization and the storage API, which have changed a lot since Android 6.

IMO your best option is an older version of FF, or install Lineage (etc) on that device and use another browser

Edit: change “age of device” to “shrinking install base”

Really nice to see improcements being made to local voice control.

I personally haven’t opted for it yet due to the computing reqirements - instead been looking into dedicated offline voice recognition modules, since they use much less power. Downside is that they recognise a mostly predefined set of commands, and are just looking for patterns in speech instead of actually performing voice recognition

Would be interesting to compare the two voice control approaches side by side at some point

IIRC Beehaw doesn’t federate downvotes. The OP has been pretty heavily downvoted for no valid reason

I’ve tried both on my low powered HTPC and came to the same conclusion - especially noticeable where video acceleration is concerned

Something about that channel feels “off”, don’t know what it is. Maybe all the rants and abundance of negative opinions?? Perhaps it’s the culture difference in how he communicates on camera?

The only positive videos I’ve seen are him moving to macOS, the dell laptop one, and i guess the keyboard one, the other ones seem to be mostly opinion pieces & rants. There are other channels that do a better, more balanced job of this I think

Explains why I was having issues with this in Gnome on my HTPC…

Ended up making a remote button shortcut to maximise and restore apps

Jawg would know everywhere where you go, since they provide the tile data. I don’t think they would be able to link it to an OSM account though

The public would be able to identify where you go because your changes would be published against your username, as it is with Wikipedia

“Abusing their dominant position” feels a bit far… the competition is just 💩 IMO. Just the fact that EGS practically gives out games for free, and still struggle to penetrate the market, should tell you all you need to know.

Steam provides discussion boards, workshop (mods), cloud saves, a whole console (deck), frequent games sales, achievements, best-in-class refund policy, regional CDNs for faster game downloads, and the list goes on. They even still support the Steam Link box which was discontinued several years ago.

They pretty much go above and beyond the current offerings of any other gaming platform, and have outlasted failed ones like Games For Windows. In the rare case that they do go out of business, there are steam emulators to run your games as long as they do not implement any additional DRM.

It says Valve “forces” game publishers to sign up to so-called price parity obligations, preventing titles being sold at cheaper prices on rival platforms.

EGS exclusives are worse, locking a whole other platform out for an entire year. With Steam’s agreement surely you could just run the sale on both platforms at the same time? Anyway, Amazon is well known for doing this, why not take them to court instead?

enabled Steam to charge an “excessive commission of up to 30%”, making UK consumers pay too much for purchasing PC games and add-on content.

The 30% fee is a bit high, but looking at everything that it pays for, and the contributions to open source, I don’t think it’s too bad. Publishers are also the ones choosing to price their games high, and to create as many DLCs as possible to increase recurring revenue. The ones who want lower fees already sell on EGS IMO…

Doubt it, after reading it myself it is nowhere as calculated and artificial as ChatGPT output

It is a pretty good read though.

Got to really wonder what’s going on at Mozilla. Between the previous CEO milking it for cash, the purchase of an ad company, and now this?

I’d suggest something with auto bed levelling at a minimum.

For a “just works” experience, you could consider the Bambulab A1 (not the Mini), although it is a proprietary design and only just exceeds the 500€/$ budget. At an additional cost, you can purchase the “AMS” which allows printing in 4 different colours.

Alternatively there’s the Creality ender 3 v3 SE and KE editions which come in at about half your budget. These use a pretty common 3D printer design and it’s fairly cheap to get spare parts or upgrades if desired. If going this route, I would personally lean towards the “KE” because it uses the open source Klipper firmware

There are a lot of Ender models available, please be cautious of the older ones and the cheap ones on Amazon as they are not the same thing - most of those have manual bed levelling and hit-or-miss quality control, which can make printing a little bit of a pain out-of-the-box for a beginner IMO…

As for me personally, I got my first 3D printer secondhand for the equivalent of €100 - it’s a Delta style printer by FLSun and works great for me, however I did binge hours of 3D printing videos to familiarize myself with things just in-case the used printer arrived broken (thankfully it didn’t, it printed fine OOTB!)

Inbound calls? Outbound calls? I would not want to sit through an ad instead of being put straight through to a bank rep to report a missing card or some other important issue

This kind of stuff should be 100% opt in as you say!