MacN'Cheezus@lemmy.today to Lemmy Shitpost@lemmy.worldEnglish · edit-21 day agoMay the torque be with you lemmy.todayimagemessage-square160fedilinkarrow-up1882arrow-down116
arrow-up1866arrow-down1imageMay the torque be with you lemmy.todayMacN'Cheezus@lemmy.today to Lemmy Shitpost@lemmy.worldEnglish · edit-21 day agomessage-square160fedilink
minus-squareempireOfLove2@lemmy.dbzer0.comlinkfedilinkEnglisharrow-up14·1 day agoJIS has been obsoleted and replaced in Japanese products with the ISO Phillips bit shape. It still exists on lots of products pre 2000 though.
minus-squareseathru@lemmy.sdf.orglinkfedilinkEnglisharrow-up5·24 hours agoKawasaki is still holding on strong to JIS screws in it’s machinery.
minus-squareempireOfLove2@lemmy.dbzer0.comlinkfedilinkEnglisharrow-up4·22 hours agoAre you sure they’re JIS? Because JIS and ISO are interchangeable and effectively the same; the ISO adopted standard used most of JIS’s rules.
minus-squareseathru@lemmy.sdf.orglinkfedilinkEnglisharrow-up3·21 hours agoYeah. I keep one of these around just for older Yamaha and newer Kawasaki equipment. You’ll end up drilling half of them out if you try to use #3 ISO. I’m in the powersports/agricultural industry, so we tend to lag behind everyone else.
minus-squareKnow_not_Scotty_does@lemmy.worldlinkfedilinkarrow-up4·23 hours agoThat’s just galvanic corrosion from using cadmium plated bolts in aluminum fuel injection hardware. It’s basically free loctite.
minus-squarehemmes@lemmy.worldlinkfedilinkEnglisharrow-up2·23 hours agoJIS is looking better according to these guys…
JIS has been obsoleted and replaced in Japanese products with the ISO Phillips bit shape. It still exists on lots of products pre 2000 though.
Kawasaki is still holding on strong to JIS screws in it’s machinery.
Are you sure they’re JIS? Because JIS and ISO are interchangeable and effectively the same; the ISO adopted standard used most of JIS’s rules.
Yeah. I keep one of these around just for older Yamaha and newer Kawasaki equipment. You’ll end up drilling half of them out if you try to use #3 ISO.
I’m in the powersports/agricultural industry, so we tend to lag behind everyone else.
That’s just galvanic corrosion from using cadmium plated bolts in aluminum fuel injection hardware. It’s basically free loctite.
JIS is looking better according to these guys…