• RidderSport@feddit.de
    link
    fedilink
    arrow-up
    0
    ·
    10 months ago

    So apparently the Russians still smoke inside their factories, what a shame

    Thank god they’re so stupid.

    • Hopfgeist@feddit.de
      link
      fedilink
      arrow-up
      0
      ·
      10 months ago

      Not sure this has been the official “explanation” this time, but looking at it from a technical side, there isn’t normally anything in a transformer flammable enough to be ignited by a cigarette, even if you could drop it directly into the cooling oil (which you can’t: they are normally sealed). My understanding is that you need a sustained arc over several minutes of “normal” electric current, or several lightning strikes to heat up the oil enough to catch fire. That requires some major fault. I guess a suitable type of warhead could cause it eventually, but not immediately.

      • Echo Dot@feddit.uk
        link
        fedilink
        arrow-up
        0
        ·
        10 months ago

        they are normally sealed

        Normally

        I wouldn’t be surprised if the issue turns out to be a comedy of errors.

        1. Damaged transformer is never fix. Due to budget issues corruption
        2. Overtime it becomes more damaged until it represents a serious safety issue. See above
        3. Absolutely no equivalent of workplace safety laws. Sea above
        4. All resulting in a massive explosion
        • Hopfgeist@feddit.de
          link
          fedilink
          arrow-up
          0
          ·
          10 months ago

          I wouldn’t be surprised if

          Neither would I. Just saying that “smoking at the workplace” alone won’t suffice. Unlike in, say, a fireworks munitions factory.

    • Hopfgeist@feddit.de
      link
      fedilink
      arrow-up
      0
      ·
      10 months ago

      Can transformer cooling oil form flammable vapour? Maybe, I guess, if it’s hot enough, but I’m not sure. But when the transformer gets hot and explodes it may cause an oil spray fine enough to create a fireball, which may look similar. The first stage of a “proper” BLEVE is normally the “expanding vapor” cloud, which is visible as such, before it has mixed with air sufficiently (and/or reaches an ignition source) to burn and form the fireball. Then again, in smaller ones, and in the dark, the vapour cloud may be so short-lived that it cannot be seen.